Difference between revisions of "Absorption length"

From GISAXS
Jump to: navigation, search
(Created page with "The '''absorption length''' or '''attenuation length''' in x-ray scattering is the distance over which the x-ray beam is absorbed. By convention, the absorption length...")
 
Line 4: Line 4:
 
The absorption follows a simple [http://en.wikipedia.org/wiki/Beer%27s_Law Beer-Lambert law]:
 
The absorption follows a simple [http://en.wikipedia.org/wiki/Beer%27s_Law Beer-Lambert law]:
 
:<math>
 
:<math>
\frac{I(x)}{I_0} = e^{ -  x / \lambda }
+
\frac{I(x)}{I_0} = e^{ -  x / \epsilon }
 
</math>
 
</math>
 +
The '''attenuation coefficient''' (or '''absorption coefficient''') is simply the inverse of the absorption length; <math>\mu = 1/
 +
 +
==Calculating==
 +
The absorption length arises from the imaginary part of the [[atomic scattering factor]], ''f''<sub>2</sub>. It is closely related to the absorption cross-section, and the mass absorption coefficient. Specifically, the '''atomic photoabsorption cross-section''' can be computed via:
 +
:<math>
 +
\sigma = 2 r_e \lambda
 +
</math>
 +
 +
==See Also==
 +
* [http://henke.lbl.gov/optical_constants/atten2.html X-Ray Attenuation Length calculator]
 +
* [http://en.wikipedia.org/wiki/Mass_attenuation_coefficient Wikipedia: Mass attenuation coefficient]
 +
* [http://www.nist.gov/pml/data/xraycoef/ NIST tables of x-ray mass attenuation coefficient]

Revision as of 13:31, 6 June 2014

The absorption length or attenuation length in x-ray scattering is the distance over which the x-ray beam is absorbed. By convention, the absorption length λ is defined as the distance into a material where the beam flux has dropped to 1/e of its incident flux.

Absorption

The absorption follows a simple Beer-Lambert law:

The attenuation coefficient (or absorption coefficient) is simply the inverse of the absorption length;

See Also