|
|
Line 18: |
Line 18: |
| \begin{alignat}{2} | | \begin{alignat}{2} |
| 2 \theta_s = \Theta & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\ | | 2 \theta_s = \Theta & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\ |
− | & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\ | + | & = \arctan\left[ \frac{ \sqrt{(d \tan \theta_f)^2 + (d \tan \alpha_f^\prime )^2}}{d} \right] \\ |
| + | & = \arctan\left[ \sqrt{\tan^2 \theta_f + \tan^2 \alpha_f^\prime } \right] \\ |
| + | & = \arctan\left[ \sqrt{\tan^2 \theta_f + \frac{ \tan^2 \alpha_f }{ \cos^2 \theta_f } } \right] \\ |
| \end{alignat} | | \end{alignat} |
| </math> | | </math> |
Line 30: |
Line 32: |
| \end{alignat} | | \end{alignat} |
| </math> | | </math> |
| + | |
| ====later==== | | ====later==== |
| As a check: | | As a check: |
Revision as of 17:50, 29 December 2015
The q-vector in fact has three components:
Consider that the x-ray beam points along +y, so that on the detector, the horizontal is x, and the vertical is z. We assume that the x-ray beam hits the flat 2D area detector at 90° at detector (pixel) position . The scattering angles are then:
where is the sample-detector distance, is the out-of-plane component (angle w.r.t. to y-axis, rotation about x-axis), and is the in-plane component (rotation about z-axis). The alternate angle, , is the elevation angle in the plane defined by . Also note that the full scattering angle is:
now
The momentum transfer components are:
later
As a check: