Difference between revisions of "Talk:Scattering"

From GISAXS
Jump to: navigation, search
(TSAXS 3D)
(TSAXS 3D)
Line 13: Line 13:
 
</math>
 
</math>
 
where <math>\scriptstyle d</math> is the sample-detector distance, <math>\scriptstyle \alpha_f ^{\prime} </math> is the out-of-plane component (angle w.r.t. to ''y''-axis, rotation about x-axis), and <math>\scriptstyle \theta_f </math> is the in-plane component (rotation about ''z''-axis). The alternate angle, <math>\scriptstyle \alpha_f </math>, is the elevation angle in the plane defined by <math>\scriptstyle \theta_f </math>. Also note that the full scattering angle is:
 
where <math>\scriptstyle d</math> is the sample-detector distance, <math>\scriptstyle \alpha_f ^{\prime} </math> is the out-of-plane component (angle w.r.t. to ''y''-axis, rotation about x-axis), and <math>\scriptstyle \theta_f </math> is the in-plane component (rotation about ''z''-axis). The alternate angle, <math>\scriptstyle \alpha_f </math>, is the elevation angle in the plane defined by <math>\scriptstyle \theta_f </math>. Also note that the full scattering angle is:
 +
 +
====now====
 
:<math>
 
:<math>
 
\begin{alignat}{2}
 
\begin{alignat}{2}
2 \theta_s  = \Theta & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right]
+
2 \theta_s  = \Theta & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\
 +
& = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\
 
\end{alignat}
 
\end{alignat}
 
</math>
 
</math>
Line 28: Line 31:
 
</math>
 
</math>
  
And, of course:
+
As a check:
 
:<math>
 
:<math>
 
\begin{alignat}{2}
 
\begin{alignat}{2}

Revision as of 18:45, 29 December 2015

TSAXS 3D

The q-vector in fact has three components:

Consider that the x-ray beam points along +y, so that on the detector, the horizontal is x, and the vertical is z. We assume that the x-ray beam hits the flat 2D area detector at 90° at detector (pixel) position . The scattering angles are then:

where is the sample-detector distance, is the out-of-plane component (angle w.r.t. to y-axis, rotation about x-axis), and is the in-plane component (rotation about z-axis). The alternate angle, , is the elevation angle in the plane defined by . Also note that the full scattering angle is:

now

The momentum transfer components are:

As a check: