Difference between revisions of "Talk:Scattering"

From GISAXS
Jump to: navigation, search
(now)
(now)
Line 18: Line 18:
 
\begin{alignat}{2}
 
\begin{alignat}{2}
 
2 \theta_s  = \Theta & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\
 
2 \theta_s  = \Theta & = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\
& = \arctan\left[ \frac{ \sqrt{x^2 + z^2}}{d} \right] \\
+
& = \arctan\left[ \frac{ \sqrt{(d \tan \theta_f)^2 + (d \tan \alpha_f^\prime )^2}}{d} \right] \\
 +
& = \arctan\left[ \sqrt{\tan^2 \theta_f + \tan^2 \alpha_f^\prime } \right] \\
 +
& = \arctan\left[ \sqrt{\tan^2 \theta_f + \frac{ \tan^2 \alpha_f }{ \cos^2 \theta_f } } \right] \\
 
\end{alignat}
 
\end{alignat}
 
</math>
 
</math>
Line 30: Line 32:
 
\end{alignat}
 
\end{alignat}
 
</math>
 
</math>
 +
 
====later====
 
====later====
 
As a check:
 
As a check:

Revision as of 18:50, 29 December 2015

TSAXS 3D

The q-vector in fact has three components:

Consider that the x-ray beam points along +y, so that on the detector, the horizontal is x, and the vertical is z. We assume that the x-ray beam hits the flat 2D area detector at 90° at detector (pixel) position . The scattering angles are then:

where is the sample-detector distance, is the out-of-plane component (angle w.r.t. to y-axis, rotation about x-axis), and is the in-plane component (rotation about z-axis). The alternate angle, , is the elevation angle in the plane defined by . Also note that the full scattering angle is:

now

The momentum transfer components are:

later

As a check: