Difference between revisions of "Talk:Scattering"

From GISAXS
Jump to: navigation, search
(later)
(Check)
Line 47: Line 47:
 
\end{alignat}
 
\end{alignat}
 
</math>
 
</math>
We note that:
+
Where we used:
 
::<math>
 
::<math>
 
\begin{alignat}{2}
 
\begin{alignat}{2}
 +
\sin( \arctan[u]) & = \frac{u}{\sqrt{1+u^2}} \\
 +
\sin \theta_f & = \sin( \arctan [x/d] ) \\
 +
& = \frac{x/d}{\sqrt{1 + (x/d)^2}} \\
 +
    & = \frac{x}{\sqrt{d^2+x^2}}
 +
\end{alignat}
 +
</math>
 +
 +
And, we further note that:
 +
::<math>
 +
\begin{alignat}{2}
 +
\cos( \arctan[u]) & = \frac{1}{\sqrt{1+u^2}} \\
 
\cos \theta_f & = \frac{1}{\sqrt{1 + (x/d)^2}} \\
 
\cos \theta_f & = \frac{1}{\sqrt{1 + (x/d)^2}} \\
 
     & = \frac{d^2}{\sqrt{d^2+x^2}}
 
     & = \frac{d^2}{\sqrt{d^2+x^2}}

Revision as of 19:28, 29 December 2015

TSAXS 3D

The q-vector in fact has three components:

Consider that the x-ray beam points along +y, so that on the detector, the horizontal is x, and the vertical is z. We assume that the x-ray beam hits the flat 2D area detector at 90° at detector (pixel) position . The scattering angles are then:

where is the sample-detector distance, is the out-of-plane component (angle w.r.t. to y-axis, rotation about x-axis), and is the in-plane component (rotation about z-axis). The alternate angle, , is the elevation angle in the plane defined by . Also note that the full scattering angle is:

The momentum transfer components are:

Check

As a check of these results, consider:

Where we used:

And, we further note that:

Continuing: