Difference between revisions of "Geometry:TSAXS 3D"

From GISAXS
Jump to: navigation, search
(Check)
(Components)
Line 100: Line 100:
  
 
==Components==
 
==Components==
The [[momentum transfer]] components are:
+
For arbitrary 3D scattering vectors, the [[momentum transfer]] components are:
 
:<math>
 
:<math>
 
\begin{alignat}{2}
 
\begin{alignat}{2}

Revision as of 12:00, 30 December 2015

In transmission-SAXS (TSAXS), the x-ray beam hits the sample at normal incidence, and passes directly through without refraction. TSAXS is normally considered in terms of the one-dimensional momentum transfer (q); however the full 3D form of the q-vector is necessary when considering scattering from anisotropic materials. The q-vector in fact has three components:

This vector is always on the surface of the Ewald sphere. Consider that the x-ray beam points along +y, so that on the detector, the horizontal is x, and the vertical is z. We assume that the x-ray beam hits the flat 2D area detector at 90° at detector (pixel) position . The scattering angles are then:

where is the sample-detector distance, is the out-of-plane component (angle w.r.t. to y-axis, rotation about x-axis), and is the in-plane component (rotation about z-axis). The alternate angle, , is the elevation angle in the plane defined by .

Total scattering

The full scattering angle is defined by a right-triangle with base d and height :

The total momentum transfer is:

Given that:

We can also write:

Where we take for granted that q must be positive.

In-plane only

If (and ), then , , and:

The other component can be thought of in terms of the sides of a right-triangle with angle :

Summarizing:

Out-of-plane only

If , then , , and:

The components are:

Summarizing:

Components

For arbitrary 3D scattering vectors, the momentum transfer components are:

In vector form:

Total magnitude

Note that this provides a simple expression for q total:

Check

As a check of these results, consider:

And:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle {\begin{alignedat}{2}&\left(1+{\frac {\sin ^{2}\theta _{f}}{\cos ^{2}\theta _{f}}}+{\frac {\sin ^{2}\alpha _{f}}{\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}}}\right)^{-1/2}\\=&\left({\frac {\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}}{\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}}}+{\frac {\cos ^{2}\alpha _{f}\sin ^{2}\theta _{f}}{\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}}}+{\frac {\sin ^{2}\alpha _{f}}{\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}}}\right)^{-1/2}\\=&\left({\frac {\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}+\cos ^{2}\alpha _{f}\sin ^{2}\theta _{f}+\sin ^{2}\alpha _{f}}{\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}}}\right)^{-1/2}\\=&\left({\frac {\cos ^{2}\theta _{f}\cos ^{2}\alpha _{f}}{\cos ^{2}\alpha _{f}\cos ^{2}\theta _{f}+\cos ^{2}\alpha _{f}\sin ^{2}\theta _{f}+\sin ^{2}\alpha _{f}}}\right)^{+1/2}\\=&{\frac {\cos \theta _{f}\cos \alpha _{f}}{\sqrt {\cos ^{2}\alpha _{f}(\cos ^{2}\theta _{f}+\sin ^{2}\theta _{f})+\sin ^{2}\alpha _{f}}}}\\=&\cos \theta _{f}\cos \alpha _{f}\end{alignedat}}}